Come l'MHA100, l'MHA150 continua a sfruttare le esclusive tecnologie McIntosh per creare la migliore esperienza di ascolto personale possibile indipendentemente dalle cuffie che utilizzi. La nostra tecnologia Autoformer ™ presente nei nostri grandi amplificatori mono e stereo è stata adattata per produrre tre intervalli di impedenza delle cuffie di 8-40, 40-150 e 150-600 Ohm in modo che ogni cuffia riceva la leggendaria qualità e prestazioni del suono McIntosh.
Per riprodurre file DSD e DXD, l'ingresso USB accetta segnali PCM fino a 32 bit/384 kHz e supporta DSD64, DSD128 e DSD256 insieme a DXD 352,8 kHz e DXD 384 kHz. Anche il nostro input MCT proprietario è stato aggiunto all'MHA150; se accoppiato con MCT80 SACD/CD Transport, offre una connessione DSD sicura per la riproduzione dell'audio ad alta definizione su SACD.
Per il collegamento di dispositivi digitali, sono inclusi un ingresso ottico e coassiale insieme agli ingressi USB e MCT; sono inoltre disponibili due ingressi analogici. Headphone Crossfeed Director (HXD ® ) aggiunge dimensione alla tua musica in un modo dal suono naturale, ma può essere disattivato in base alle tue preferenze. L'MHA150 è più piccolo degli altri nostri amplificatori, offrendoti ulteriore flessibilità per posizionarlo quasi ovunque nel tuo spazio. Ha la stessa larghezza dell'MB50 Streaming Audio Player e i due possono essere combinati per iniziare a costruire un sistema completo.
Caratteristiche Tecniche
| Headphone Output Specifications | |
|---|---|
| Headphone Power Output | High Setting: 1W<br>Normal Setting: 250mW |
| Headphone Output Impedance | 8-40 Ohm<br>40-150 Ohm<br>150-600 Ohm |
| Electronic Specifications | |
|---|---|
| Power Output per Channel | 50 Watts |
| Speaker Impedance | 8 Ohm |
| Rated Power Bandwidth | 20Hz to 20kHz |
| Total Harmonic Distortion | 0.005% |
| Intermodulation Distortion |
0.005% maximum, if peak instantaneous power is 100 watts per channel or less with both channels operating for any combination of frequencies from 20 Hz to 20 kHz |
| Dynamic Headroom | 1.5 dB |
| Frequency Response | +0, -0.5dB from 20Hz to 20kHz<br>+0, -3dB from 10Hz to 100kHz |
| Sensitivity (Unbalanced) | 300mV |
| Sensitivity (Balanced) | 600mV |
| Maximum Input Signal (Unbalanced) | 8V |
| Maximum Input Signal (Balanced) | 16V |
| Signal-to-Noise Ratio | 105 dB |
| Input Impedance (Balanced/Unbalanced) | 25K/25K |
| Damping Factor | >150 |
| Preamplifier Output | 3V (maximum 8V) |
| Preamplifier Output Impedance | 500 Ohm |
| Voltage Gain | 36.5 dB |
| Power Guard | <2% THD with overdrive up to 16dB at 1kHz |
| Connectivity | |
|---|---|
| Headphone Output | 1/4" high-level with Director Crossfeed for headphones (HXD®) |
| Balanced Input | 1 |
| Unbalanced Input | 1 |
| AES/EBU Digital Input | 0 |
| Coaxial Digital Input | 1 |
| Optical Digital Input | 1 |
| MCT Digital Input | 1 |
| USB Digital Input | 1 |
| Preamplifier Output | 1 |
| Digital Audio Specifications | |
|---|---|
| AES/EBU Digital Input Sampling Frequency | N/A |
| Coaxial Digital Input Sampling Frequency | 16 bit, 24 bit: 32 kHz to 192 kHz |
| Optical Digital Input Sampling Frequency | 16 bit, 24 bit: 32 kHz to 192 kHz |
| MCT Digital Input Sampling Frequency | 16 bit, 24 bit: 32 kHz to 192 kHz |
| USB Digital Input Sampling Frequency | 16 bit, 24 bit, 32 bit - 32 kHz to 384 kHz |
| Control | |
|---|---|
| Tone Controls | 5-level Bass Boost Control: 0 to +12.5 dB (in 2.5 dB increments) at 40 Hz |
| Power Control Input | 1 |
| Power Control Output | 1 |
| General Specifications | |
|---|---|
| Output Meters | Yes |
| Vacuum Tube or Solid State | Solid State |
| Power Requirements | 120 V 50/60 Hz, 1.5 A |
| Standby Power Requirement | <0.25 Watt |
| Output Type | Autoformer™ for headphones<br>Direct coupling for speakers |
| Weights & Dimensions | |
|---|---|
| Unit Dimensions (W x H x D) | 11-1/2" (29.2 cm) x 5-7/8" (14.9 cm) x 14-5/8" (37.1 cm) |
| Unit Weight | 26.5 lbs (12 kg) |
| Shipping Weight | 32.5 lbs (14.8 kg) |
